Aeroworks extra 300 100cc build
The aircraft was tested with the DA- cc and has outstanding performance. Secure with nylon lock nut. Apply baby powder or corn starch to antenna 5. Note: Bolts have been offset to ensure correct in- 1 landing gear strut, 2 Gear Cuffs 2 wheels, stallation of gear. I have never seen a plane packed as well as this one was. Assemble the pipes to the headers with the Tef- tors in the slots of the tuned pipe holding brack- lon coupler and clamps in accordance with ets as shown below. Assemble the rod as shown below.
Aeroworks is proud to add the New cc Extra to their line of QUICK BUILD Series Aircraft Designed with the customer in mind to provide. Aeroworks has recently come out with a cc Extra Wouldn't you know it that the oppourtunity has come out to build and fly one. Page 1 cc Extra ARF-QB (Quick Build) ASSEMBLY MANUAL AEROWORKS Nome St– Denver, CO.
Assemble the ball links between the control 4.
Aeroworks cc Extra TeamFlyingCircus Giant RC Plane Forum
The next step was to remove the parts from their nicely bubble wrapped packaging. Page 12 Attach the Y harness to the inboard servo 4. Enter text from picture:.
Video: Aeroworks extra 300 100cc build Joe Smith AeroWorks Extra 100cc at Galion Fest
Secure the wheel pant using the supplied A cc 34oz fuel tank has been provided. Just throwing that out there
RC Neighborhood Forums cc Extra Restoration Project! (1/1)
Aeroworks is proud to introduce their New line of QUICK BUILD Series Aircraft. Aeroworks is proud to add the New cc Extra to. Aeroworks is proud to add the cc Extra ARF QB to their line of Quick Build Series Aircraft.
The Quick Build (QB) Series is top quality in both design and. [attachment] Started with Mark's old Aeroworks Extra Build Threads I got some extra graphics still saved on the computer from Paul's cc Extra.
They have been marked left and right for strut is facing toward the rear.
Use correct amount of spacers and washers to achieve this distance. Only snug tighten at this time.
Adjust the tension of the pull pull cables until the pushrod length to prevent the servo from they are tight. This makes installing the landing gear a snap.