Eq3 2 polar scope reticle
Follow us:. The other trick is to set your mount position in an accurately repeatable positionthat way you only need to accurately polar align oncelock the tripod off and then make sure that it goes back in the same place each time. You do need a laptop though Posted February 21, Next step for correcting this, would be adjusting the three small grub screws, that push the peace of glass with the cross drawings that installed inside. If you have look at an article called Kochabs Clock, it goes to some lengths to explain that excellent results, using this method, can be achieved with a finder scope. Thoroughly recommended. That would be end of, hope you find it useful.
EQ / HEQ5 EQ5 / Finely etched laser reticle with position for polaris to year I found it extremely confusing to fit the Polarscope to my EQ mount. USING THE POLAR SCOPE FOR EQ & EQ4.
Fig.a. Fig.b It has a large circle circumscribing the path of Polaris, with the NCP located at the crosshair, and it.
That done, the RA axis (and the centre mark on the polar scope reticle) should.
Skywatcher synscan handset tells you where to put polaris on the hour angle of the reticle, during start up. Excelente embalaje. I do exactly this with my EQ6 mount. What will actually happen, is that we align only two axeses of three, which is the Polar Scope's axis and Earth's axis. To have perfect Polar Alignment we have to align our mount's RA axis to the Earth's rotational axis and it's done with the help of the Polar Scope.
That is for preventing the error shifting to the other side when we rotate the mount in the next steps. Someone also mentioned a few weeks back the possibility of modifying a right-angle adaptor for DSLR viewfinders to fit a polar scope.
Video: Eq3 2 polar scope reticle Polar Scope - How To Use A Polar Scope
I attach you a screenshot of what I see from the polar scope of my skywatcher eq3 -2 mount. The reticle doesnt seem to be straight, whereas the.
Polar Scope Calibration
High quality polarscopes for precise polar alignment at Rother Valley Optics. Skywatcher Polarscope Illuminator For EQ, EQ5 & Star Adventurer Mounts£.
It can also be hard to see the reticule at night as it isn't illuminated.
After placing my mount in the direction of the object, I like to use small chair and do so while I'm sitting. And my target for this proceedure would be the end of the antenna.
I do exactly this with my EQ6 mount. What will actually happen, is that we align only two axeses of three, which is the Polar Scope's axis and Earth's axis.
Video: Eq3 2 polar scope reticle Polar Scope Reticule Centering & Mods
How do you mount the webcam onto the polarscope?